2 General hint: if you get compile errors, then likely your configuration
3 hasn't been tested well. Either try with "--enable-everything" or use
4 the ./reconf script as a base for experiments. ./reconf is used by
5 myself, so it should generally be a working config. Of course, you
6 should always report when a combination doesn't work, so it can be
7 fixed. Marc Lehmann <rxvt@schmorp.de>.
12 Add (or remove) support for all non-multichoice options listed in
15 You can specify this and then disable options you do not like by
16 *following* this with the appropriate "--disable-..." arguments, or
17 you can start with a minimal configuration by specifying
18 "--disable-everything" and than adding just the "--enable-..."
21 --enable-xft (default: enabled)
22 Add support for Xft (anti-aliases, among others) fonts. Xft fonts
23 are slower and require lots of memory, but as long as you don't use
24 them, you don't pay for them.
26 --enable-font-styles (default: on)
27 Add support for bold, *italic* and *bold italic* font styles. The
28 fonts can be set manually or automatically.
30 --with-codesets=NAME,... (default: all)
31 Compile in support for additional codeset (encoding) groups ("eu",
32 "vn" are always compiled in, which includes most 8-bit character
33 sets). These codeset tables are used for driving X11 core fonts,
34 they are not required for Xft fonts, although having them compiled
35 in lets rxvt-unicode choose replacement fonts more intelligently.
36 Compiling them in will make your binary bigger (all of together cost
37 about 700kB), but it doesn't increase memory usage unless you use a
38 font requiring one of these encodings.
40 all all available codeset groups
41 zh common chinese encodings
42 zh_ext rarely used but very big chinese encodings
43 jp common japanese encodings
44 jp_ext rarely used but big japanese encodings
47 --enable-xim (default: on)
48 Add support for XIM (X Input Method) protocol. This allows using
49 alternative input methods (e.g. kinput2) and will also correctly set
50 up the input for people using dead keys or compose keys.
52 --enable-unicode3 (default: off)
53 Recommended to stay off unless you really need non-BMP characters.
55 Enable direct support for displaying unicode codepoints above 65535
56 (the basic multilingual page). This increases storage requirements
57 per character from 2 to 4 bytes. X11 fonts do not yet support these
58 extra characters, but Xft does.
60 Please note that rxvt-unicode can store unicode code points >65535
61 even without this flag, but the number of such characters is limited
62 to a view thousand (shared with combining characters, see next
63 switch), and right now rxvt-unicode cannot display them
64 (input/output and cut&paste still work, though).
66 --enable-combining (default: on)
67 Enable automatic composition of combining characters into composite
68 characters. This is required for proper viewing of text where
69 accents are encoded as seperate unicode characters. This is done by
70 using precomposited characters when available or creating new
71 pseudo-characters when no precomposed form exists.
73 Without --enable-unicode3, the number of additional precomposed
74 characters is somewhat limited (the 6400 private use characters will
75 be (ab-)used). With --enable-unicode3, no practical limit exists.
77 This option will also enable storage (but not display) of characters
78 beyond plane 0 (>65535) when --enable-unicode3 was not specified.
80 The combining table also contains entries for arabic presentation
81 forms, but these are not currently used. Bug me if you want these to
82 be used (and tell me how these are to be used...).
84 --enable-fallback(=CLASS) (default: Rxvt)
85 When reading resource settings, also read settings for class CLASS.
86 To disable resource fallback use --disable-fallback.
88 --with-res-name=NAME (default: urxvt)
89 Use the given name as default application name when reading
90 resources. Specify --with-res-name=rxvt to replace rxvt.
92 --with-res-class=CLASS /default: URxvt)
93 Use the given class as default application class when reading
94 resources. Specify --with-res-class=Rxvt to replace rxvt.
96 --enable-utmp (default: on)
97 Write user and tty to utmp file (used by programs like w) at start
98 of rxvt execution and delete information when rxvt exits.
100 --enable-wtmp (default: on)
101 Write user and tty to wtmp file (used by programs like last) at
102 start of rxvt execution and write logout when rxvt exits. This
103 option requires --enable-utmp to also be specified.
105 --enable-lastlog (default: on)
106 Write user and tty to lastlog file (used by programs like lastlogin)
107 at start of rxvt execution. This option requires --enable-utmp to
110 --enable-xpm-background (default: on)
111 Add support for XPM background pixmaps.
113 --enable-transparency (default: on)
114 Add support for inheriting parent backgrounds thus giving a fake
115 transparency to the term.
117 --enable-fading (default: on)
118 Add support for fading the text when focus is lost (requires
119 "--enable-transparency").
121 --enable-tinting (default: on)
122 Add support for tinting of transparent backgrounds (requires
123 "--enable-transparency").
125 --enable-rxvt-scroll (default: on)
126 Add support for the original rxvt scrollbar.
128 --enable-next-scroll (default: on)
129 Add support for a NeXT-like scrollbar.
131 --enable-xterm-scroll (default: on)
132 Add support for an Xterm-like scrollbar.
134 --enable-plain-scroll (default: on)
135 Add support for a very unobtrusive, plain-looking scrollbar that is
136 the favourite of the rxvt-unicode author, having used it for many
139 --enable-ttygid (default: off)
140 Change tty device setting to group "tty" - only use this if your
141 system uses this type of security.
143 --disable-backspace-key
144 Removes any handling of the backspace key by us - let the X server
148 Removes any handling of the delete key by us - let the X server do
152 Removes any support for resource checking.
155 Remove support for secondary/swap screen.
157 --enable-frills (default: on)
158 Add support for many small features that are not essential but nice
159 to have. Normally you want this, but for very small binaries you may
160 want to disable this.
162 A non-exhaustive list of features enabled by "--enable-frills"
163 (possibly in combination with other switches) is:
166 EWMH-hints (pid, utf8 names) and protocols (ping)
168 seperate underline colour (-underlineColor)
169 settable border widths and borderless switch (-w, -b, -bl)
170 visual depth selection (-depth)
171 settable extra linespacing /-lsp)
172 iso-14755-2 and -3, and visual feedback
173 tripleclickwords (-tcw)
174 settable insecure mode (-insecure)
175 keysym remapping support
176 cursor blinking and underline cursor (-cb, -uc)
177 XEmbed support (-embed)
180 skip builtin block graphics (-sbg)
181 separate highlightcolor support (-hc)
183 It also enables some non-essential features otherwise disabled, such
186 some round-trip time optimisations
187 nearest color allocation on pseudocolor screens
188 UTF8_STRING support for selection
189 sgr modes 90..97 and 100..107
190 backindex and forwardindex escape sequences
191 view change/zero scrollback escape sequences
192 locale switching escape sequence
193 window op and some xterm/OSC escape sequences
194 rectangular selections
195 trailing space removal for selections
196 verbose X error handling
198 --enable-iso14755 (default: on)
199 Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt).
200 Basic support (section 5.1) is enabled by "--enable-frills", while
201 support for 5.2, 5.3 and 5.4 is enabled with this switch.
203 --enable-keepscrolling (default: on)
204 Add support for continual scrolling of the display when you hold the
205 mouse button down on a scrollbar arrow.
207 --enable-mousewheel (default: on)
208 Add support for scrolling via mouse wheel or buttons 4 & 5.
210 --enable-slipwheeling (default: on)
211 Add support for continual scrolling (using the mouse wheel as an
212 accelerator) while the control key is held down. This option
213 requires --enable-mousewheel to also be specified.
215 --disable-new-selection
216 Remove support for mouse selection style like that of xterm.
218 --enable-dmalloc (default: off)
219 Use Gray Watson's malloc - which is good for debugging See
220 <http://www.letters.com/dmalloc/> for details If you use either this
221 or the next option, you may need to edit src/Makefile after
222 compiling to point DINCLUDE and DLIB to the right places.
224 You can only use either this option and the following (should you
227 --enable-dlmalloc (default: off)
228 Use Doug Lea's malloc - which is good for a production version See
229 <http://g.oswego.edu/dl/html/malloc.html> for details.
231 --enable-smart-resize (default: on)
232 Add smart growth/shrink behaviour when changing font size via hot
233 keys. This should keep the window corner which is closest to a
234 corner of the screen in a fixed position.
236 --enable-pointer-blank (default: on)
237 Add support to have the pointer disappear when typing or inactive.
239 --enable-perl (default: on)
240 Enable an embedded perl interpreter. See the rxvtperl(3) manpage
241 (doc/rxvtperl.txt) for more info on this feature, or the files in
242 src/perl-ext/ for the extensions that are installed by default. The
243 perl interpreter that is used can be specified via the "PERL"
244 environment variable when running configure.
246 --with-name=NAME (default: urxvt)
247 Set the basename for the installed binaries, resulting in "urxvt",
248 "urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt".
250 --with-term=NAME (default: rxvt-unicode)
251 Change the environmental variable for the terminal to NAME.
254 Change the environmental variable for the path to the terminfo tree
258 Use the X Window System (pretty much default, eh?).
260 --with-xpm-includes=DIR
261 Look for the XPM includes in DIR.
263 --with-xpm-library=DIR
264 Look for the XPM library in DIR.
267 Not needed - define via --enable-xpm-background.